Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 169)

7 • RT (Real Time)
169
PowerMonitor 5000 Device Configuration Window
To launch the device configuration window, select a power monitor device in the
navigation tree System tab, and click the Device Configuration link in the device setup
screen in the detail pane.
The window title bar displays the device name of the power monitor.
 OK Button
This saves the entries on all tabs to the database and closes the window.
 Cancel Button
This cancels the entries from all tabs and closes the window.
 Upload Button
This uploads configuration settings from the power monitor to RT. After uploading,
click OK to save the configuration to the database and close the Device Configuration
window.
Set up groups and power monitor devices before using RT to modify the power
monitor configuration. If security is enabled in the power monitor, there must be a
valid application-class user name and password entered in the Device Setup screen
to change any configuration settings in the power monitor.