Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 74)

FactoryTalk EnergyMetrix Software
74
3. The Add a Meter dialog box appears.
4. Select a Parent Group.
The default is the group selected when you began to configure the meter.
5. Select a meter Type from the pull-down menu.
6. Select a Device from the pull-down menu.
If you need to, configure a new Device.
7. Enter a name for the new meter and any notes you wish to record.
8. Select a time zone for the meter.
A new meter is automatically configured to contribute 100% of its value to its parent
group.
9. To adjust the contribution factor, navigate to the System tab, Groups folder, select the
parent group of the new meter, and edit the Group Setup screen.