Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 201)

8 • ChartsPlus
201
Time Zone Field
Sets the time zone reference for the trend chart. Data from meters outside the selected time
zone will be offset by the time zone difference.
Start Date and End Date Field
Select a chart time scale by entering start and end dates into the field. You can also select
start and end dates from a calendar by clicking the down arrow button next to the field.
Include Zero on Y Axis
Check this box if you wish to have a zero reference on the chart.
Calculation Interval
Select from 3 choices from the pull-down menu:
 All data
 Day
 Week
Configure Y, Configure X1, X2, X3
This button launches a dialog box from which you can select meter tags to display in the
trend.
 Group
Select the group of which the desired meter is a member.
 View data
Select By meters to view an individual meter. Select By groups to aggregate a group's
meters into a single trend line.
 Meter
Select the desired meter from the pull-down menu. This field is disabled (grayed-out)
if By groups is selected.
 Meter tag
Select the meter tag from the pull-down menu.
 Add - Update - Cancel buttons
Click Add or Update to save your configuration selections or Cancel to discard them.
Plot
Click Plot to retrieve data from the database and generate the trend chart. The Plot button
will also clear any target settings and excluded points.
Independent (Xn) variables can only be added in order X1, X2
and X3, and removed in reverse order, X3, X2, and X1.