Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 308)

FactoryTalk EnergyMetrix Software
308
Click any device link to open a new browser window with detailed information on the
device and its associated meters and meter tags.
Telnet
You can connect to the FactoryTalk EnergyMetrix server by using Telnet to perform a
number of diagnostic tasks. Telnet is enabled or disabled (default) by using the
Configuration page. You can also select a remote debug port (default 23) and a password
(default ""). See
System Configuration on page 23 for more information.
Follow these steps to use Telnet.
1. From the Windows Start button, select Run, enter ‘Telnet’ in the Open field, and click
OK.
2. In the Telnet window, type ‘Server name’.
‘Server name’ is the name or IP address of the server.
open [server name]
The logger debug console window appears.