Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 210)

FactoryTalk EnergyMetrix Software
210
Power Factor Report
The Power Factor report lists real energy net, reactive energy net, and power factor (which
is calculated from the real energy and reactive energy values) for selected meters for a
selected date range divided into specified calculation intervals (hours, days, or months).
Report output is tabular with a chart of power factor on the first page. Power factor values
are signed: a negative sign indicates lagging power factor and a positive sign indicates a
leading power factor. The chart is arranged with unity power factor as the horizontal axis
with leading power factor displayed above the axis and lagging power factor below the
axis.
For this report to function, the selected meters or groups must be logging Real Energy Net
and Reactive Energy Net.
To set up a power factor report, navigate to the Reports tab in the navigation tree. Select
the Global Reports folder or a domain. When the screen refreshes, click the Add button to
set up a new report.
The Add a new report screen appears. Enter the report options into the data fields. When
you have completed entering the options, click the Save button to create the new report or
Cancel to abandon your changes.
Options
These are the options in the Power Factor report.
 Report Name
Enter a name for the new report.
 Report Template
Select Power factor from the pull-down menu.
 Report File
Use the default file PowerFactor.rpx.
 Report Parent Group
Leave None selected for a Global report or select a parent group from the pull-down
menu.
 Meter Selections
Select Meters or Groups from the tree in the Add a Report screen. Click the Select by
link to toggle between by Meters and by Groups selection criteria.
Report Run-time Options
Make the following selections from the Report Parameters list at report run time and click
View to generate and view the report.
 Export Type
Select a report output type from the pull-down menu. Default is pdf.
 Time Zone
Select the time zone in which you wish the report to run