Rockwell Automation 9307 FactoryTalk EnergyMetrix - Manual (Page 106)

FactoryTalk EnergyMetrix Software
106
View a Trend Chart
Follow these steps to view a Trend chart.
1. Navigate to and select a Group or Meter in the Meters tab of the navigation tree.
2. Select the Trend tab in the detail pane.
3. A blank chart appears labeled ‘No meter tags selected’.
4. If desired, select a time zone for the chart.
The default is the logged-in user time zone.
5. Select a meter tag to display from the pull-down menu.
6. Select a start and end date for the trend by using the calendars.
Or, you can enter the start and end dates into the data entry fields and click Go. If
fiscal calendar functionality is enabled, the calendars will display fiscal months.
7. To add another meter tag, select another tag from the pull-down menu.
8. To add a tag from another meter, navigate to and select the other meter in the meters
tab of the navigation tree and select a tag from its list.
You may view up to 5 tags in a standard Trend chart.
If you hover the mouse cursor over the trend chart for a moment, a menu bar appears.
From this menu bar, you can Save, Print, or Email the chart image.
9. Click Hide to temporarily not display a meter tag on the trend chart.
The tag will still be selected, just not displayed. To show the tag again, click Show.
10. Click Bar to display a bar chart for the selected tag.
The button toggles between Bar and Line to allow you to select the desired chart type
for each tag.
11. To permanently remove a tag from the trend chart, click Remove.
12. To save the trend chart's data series as a .CSV file, click Export Data.
Your trend selections will persist until you log out
View a Calendar trend
Follow these steps to view a calendar trend of a meter's or group's data.
1. Navigate to and select the meter or group in the Meters tab of the navigation tree.
2. Click the Calendar trend tab in the detail pane.
3. Select the meter tag or value type you wish to trend from the pull-down menu.
The Calendar trend is most commonly used to display demand-type values.
4. Select a month and year from the respective pull-down menu.
If fiscal calendar functionality is enabled, a fiscal month is displayed.