Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 106)

B-14 DeviceNet Adapter for use with DPI AC Drives
Source of peer output data. The adapter transmits this data to the
network.
Important: These parameters can be changed only when Peer Out
Enable (41) is Off.
Important: If a 32-bit Datalink or Reference is used in Peer A
Output (39), Peer Output (40) cannot be used.
Determines if peer output is on or off.
Minimum time that a adapter will wait when transmitting to a peer.
39
40 Peer A Output
Peer B Output
Range: 0 = Off
1 = Cmd/Ref
2 = DL A Input
3 = DL B Input
4 = DL C Input
5 = DL D Input
6 = DL A Output
7 = DL B Output
8 = DL C Output
9 = DL D Output
Default: 0 = Off
Type: Read/Write
Reset Required: No
41 Peer Out Enable
Range: 0 = Off
1 = On
Default: 0 = Off
Type: Read/Write
Reset Required: No
42 Peer Out Time
Range: 0.01 to 10.00 seconds
Default: 10.00 seconds
Type: Read/Write
Reset Required: No