2 adapter diagnostic items – Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives User Manual
Page 85
Troubleshooting the DeviceNet Adapter and Network
8-5
8.2
Adapter Diagnostic Items
The following diagnostic items can be accessed using VS Utilities.
Table 8.4 – Diagnostic Items Accessed Using VS Utilities
No.
Name
Description
1
Common Logic
Cmd
Current value of the Common Logic Command being
transmitted to the host by this peripheral.
2
Prod Logic Cmd Current value of the Product Specific Logic Command
being transmitted to the host by this peripheral.
3
Reference
Current value of the Product Specific Reference being
transmitted to the host by this peripheral.
4
Common Logic
Sts
Current value of the Common Logic Status being
received from the host by this peripheral.
5
Prod Logic Sts
Current value of the Product Specific Logic Status
being received from the host by this peripheral.
6
Feedback
Current value of the Product Specific Feedback being
received from the host by this peripheral.
7
Datalink A1 In
Current value of Datalink A1 In being transmitted to
the host by this peripheral (if not using Datalink A1,
this parameter should have a value of zero).
8
Datalink A2 In
Current value of Datalink A2 In being transmitted to
the host by this peripheral (if not using Datalink A2,
this parameter should have a value of zero).
9
Datalink B1 In
Current value of Datalink B1 In being transmitted to
the host by this peripheral (if not using Datalink B1,
this parameter should have a value of zero).
10
Datalink B2 In
Current value of Datalink B2 In being transmitted to
the host by this peripheral (if not using Datalink B2,
this parameter should have a value of zero).
11
Datalink C1 In
Current value of Datalink C1 In being transmitted to
the host by this peripheral (if not using Datalink C1,
this parameter should have a value of zero).
12
Datalink C2 In
Current value of Datalink C2 In being transmitted to
the host by this peripheral (if not using Datalink C2,
this parameter should have a value of zero).
13
Datalink D1 In
Current value of Datalink D1 In being transmitted to
the host by this peripheral (if not using Datalink D1,
this parameter should have a value of zero).
14
Datalink D2 In
Current value of Datalink D2 In being transmitted to
the host by this peripheral (if not using Datalink D2,
this parameter should have a value of zero).