Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 94)

B-2 DeviceNet Adapter for use with DPI AC Drives
Port to which the adapter is connected. This will usually be port 5.
Data rate used by the drive. This data rate is set in the drive and the
adapter detects it.
Node address if the Data Rate switch is set to “PGM” (Program).
DeviceNet node address actually used by the adapter.
1 DPI Port
Range: 0 to 7
Default: 0
Type: Read Only
Reset Required: N/A
2 DPI Data Rate
Range: 0 = 125 kbps
1 = 500 kbps
Default: 1 = 500 kbps
Type: Read Only
Reset Required: N/A
3 DN Addr Cfg
Range: 0 to 63
Default: 63
Type: Read/Write
Reset Required: Yes
4 DN Addr Actual
Range: 0 to 63
Default: 63
Type: Read Only
Reset Required: N/A