Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 89)

Troubleshooting the DeviceNet Adapter and Network 8-9
25 Idle I/O
Message The DeviceNet scanner was placed in program
mode.
26 Peer I/O
Timeout The adapter has not received peer I/O from another
device on the network within the specified time-out
interval.
27 DPI Fault
Clear The DPI product issued this because a fault was
cleared.
28 DN COS
Timeout A change of state (COS) connection has timed out.
29 DN Poll
Allocate A polled connection has been allocated.
30 DN COS
Allocate A change of state (COS) I/O connection has been
allocated.
31 DN Poll
Closed A polled I/O connection was explicitly closed.
32 DN COS
Closed A change of state (COS) connection was explicitly
closed.
33 Safe State
Error At least one of the Fault Configuration parameters
contains a value greater than 65535 and the DPI
product expects a 16-bit value.
34 Language
CRC Bad The language text memory segment is corrupt.
Table 8.5 – Event Codes and Descriptions (Continued)
Code Event Description