Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 25)

Configuring the DeviceNet Adapter 4-1
C
HAPTER
4
Configuring the
DeviceNet Adapter
Chapter 4 provides instructions and information for setting the
parameters in the DeviceNet adapter.
For a list of parameters, refer to Appendix B, DeviceNet Adapter
Parameters. For definitions of terms in this chapter, refer to the
Glossary.
4.1 Configuration Tools
The DeviceNet adapter stores parameters and other information in
its own non-volatile memory. Therefore, you must access the
adapter to view and edit its parameters. Table 4.1 lists the tools that
can be used to access the adapter parameters.
RSNetWorx for DeviceNet (version 2.22.18) and RSLinx (version
2.10.118) were used for examples in this manual. Different versions
of software may differ in appearance and procedures.
Note that explicit messaging can also be used to configure a
DeviceNet adapter and drive. Refer to Chapter 7, Using Explicit
Messaging.
Table 4.1 – Configuration Tools
Tool Refer To:
VS Utilities Software VS Utilities online help
LCD OIM Section 4.2
RSNetWorx for DeviceNet Section 4.3