Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 27)

Configuring the DeviceNet Adapter 4-3
Table 4.2 – Procedure for Setting Up RSLinx for RSNetworx for DeviceNet
Step Action Icon
1. Start RSLinx, and select Communications >
Configure Drivers to display the Configure
Drivers dialog box. See figure 4.2.
2. In the Available Driver Types box, select
DeviceNet Drivers, and then click Add New.
The DeviceNet Driver Selection dialog box
appears.
3. In the Available DeviceNet Drivers list, select
the adapter connected to your computer, and
then click Select. A Driver Configuration dialog
box appears.
Configure the driver for your computer and
network settings, and then click OK. The
Configure Drivers dialog box reports the
progress of the configuration. Then, the Add
New RSLinx Driver dialog box appears.
4. Type a name (if desired), and then click OK.
The Configure Drivers dialog box reappears,
and the new driver is in the Configured Drivers
List.
5. Click Close to close the dialog box. Leave
RSLinx running.
Shortcut to
RSLinx
Figure 4.2 – Configure Drivers Dialog Box with a Configured Driver