Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 95)

DeviceNet Adapter Parameters B-3
DeviceNet data rate if the data rate switch is set to “PGM”
(Program).
DeviceNet data rate actually used by the adapter.
Size of the Reference/Feedback. The drive determines the size of
the Reference/Feedback.
Size of each Datalink word. The drive determines the size of
Datalinks.
5 DN Rate Cfg
Range: 0 = 125 kbps
1 = 250 kbps
2 = 500 kbps
3 = Autobaud
Default: 3 = Autobaud
Type: Read/Write
Reset Required: Yes
6 DN Rate Actual
Range: 0 = 125 kpbs
1 = 250 kbps
2 = 500 kbps
3 = Autobaud
Default: 0 = 125 kbps
Type: Read Only
Reset Required: N/A
7 Ref/Fdbk Size
Range: 0 = 16-bit
1 = 32-bit
Default: 0 = 16-bit
Type: Read Only
Reset Required: N/A
8 Datalink Size
Range: 0 = 16-bit
1 = 32-bit
Default: 0 = 16-bit
Type: Read Only
Reset Required: N/A