Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 22)

3-4 DeviceNet Adapter for use with DPI AC Drives
3.4 Connecting the Adapter to the Drive
Step 1. Remove power from the drive and network.
Step 2. Use static control precautions.
Step 3. Connect the Internal Interface cable to the DPI port on the
drive and then to the DPI connector on the adapter.
➀ 15.24 cm (6 in.) Internal Interface cable
➁ DPI Connector
➂ DeviceNet cable
➃ 2.54 cm (1 in.) Internal Interface cable
Figure 3.4 – DPI Ports and Internal Interface Cables
➀
➁
➂
➃
DeviceNet Adapter SP600 AC Drive
1-20 HP @ 460 V
SP600 AC Drive
25-40 HP @ 460 V