Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 45)

Configuring the DeviceNet Adapter 4-21
14 DPI I/O
Active The Reference/Feedback and Datalinks used
by the adapter. This value is the same as DPI
I/O Config (13) unless the parameter was
changed and the adapter was not reset.
Table 4.8 – Adapter Configuration Status Parameters (Continued)
Number Name Description
0 0 0 1 0 x x x
0 1 2 3 4 5 6 7
1 =Enabled
0 =Disabled
x =Not Used
Cmd/Ref Datalink A Datalink B Datalink C Datalink D