Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 9)

Contents VII
List of Tables
Table 2.2 – Equipment Shipped with the DeviceNet Adapter ..................... 2-2
Table 2.3 – Required User-Supplied Equipment ........................................ 2-2
Table 4.1 – Configuration Tools.................................................................. 4-1
Table 4.2 – Procedure for Setting Up RSLinx for RSNetworx for DeviceNet 4-3
Table 4.3 – Viewing Devices on the DeviceNet Network using RSNetWorx. 4-4
Table 4.4 – Procedure for Creating an EDS File ........................................ 4-5
Table 4.5 – Procedure to Access and Edit Parameters Using RSNetWorx 4-6
Table 4.6 – Selections for Drive Response to Communication Fault........ 4-17
Table 4.7 – Fault Configuration Parameters ............................................. 4-18
Table 4.8 – Adapter Configuration Status Parameters ............................ 4-20
Table 5.1 – Host Products Using 16-Bit Reference/Feedback & Datalinks 5-4
Table 5.2 – Host Products Using 32-Bit Reference/Feedback &Datalinks . 5-5
Table 5.3 – Scan Rates .............................................................................. 5-5
Table 5.4 – Scanner Module Memory Locations ........................................ 5-7
Table 5.5 – Scanner Module Memory Locations ........................................ 5-8
Table 6.1 – Tags for the Sample ControlLogix Program............................. 6-7
Table 6.2 – Control File for Block Transfers ............................................... 6-9
Table 7.1 – ControlLogix Message Requests and Responses ................... 7-3
Table 7.2 – Number of Transaction Blocks Reserved for Explicit Messaging7-5
Table 7.3 – PLC / SLC Explicit Message Requests.................................... 7-5
Table 7.4 – PLC / SLC Explicit Message Responses ................................. 7-6
Table 7.5 – Tags for the Sample Explicit Messaging Program ................... 7-9
Table 7.6 – Request Data for Read of Drive Parameter 101 .................... 7-10
Table 7.7 – Response Data for Read of Drive Parameter 101 ................. 7-10
Table 7.8 – Request Data for Write to Drive Parameter 101 .................... 7-10
Table 7.9 – Response Data for Write to Drive Parameter 101 ................. 7-10
Table 7.10 – Request Data for Read of Drive Parameter 101 .................. 7-12
Table 7.11 – Response Data for Read of Drive Parameter 101 ............... 7-12
Table 7.12 – Request Data for Write to Drive Parameter 101 .................. 7-12
Table 7.13 – Response Data for Write to Drive Parameter 101 ............... 7-12
Table 8.1 – DRIVE Status Indicator: State Definitions................................ 8-2
Table 8.2 – MS Status Indicator: State Definitions ..................................... 8-3
Table 8.3 – NET A Status Indicator: State Definitions ................................ 8-4
Table 8.4 – Diagnostic Items Accessed Using VS Utilities ........................ 8-5
Table 8.5 – Event Codes and Descriptions ................................................ 8-7