Rockwell Automation RECOMM-DNET DeviceNet Adapter for use with DPI AC Drives - Manual (Page 98)

B-6 DeviceNet Adapter for use with DPI AC Drives
I/O that is transferred.
I/O that the adapter is actively transmitting. The value of this
parameter will usually be equal to the value of DPI I/O Config (13).
13 DPI I/O Config
Range: See figure B.1.
Default: See figure B.1.
Type: Read Only
Reset Required: N/A
Figure B.1 – DPI I/O Config (13)
0 0 0 1 0 x x x
0 1 2 3 4 5 6 7
1 = I/O Enabled
0 = I/O Disabled
x =Not Used
Cmd/Ref Datalink A Datalink B Datalink C Datalink D Not Used Not Used Not Used
14 DPI I/O Active
Range: See figure B.2.
Default: See figure B.2.
Type: Read Only
Reset Required: N/A
Figure B.2 – DPI I/O Active (14)
0 0 0 1 0 x x x
0 1 2 3 4 5 6 7
1 = I/O Enabled
0 = I/O Disabled
x =Not Used
Cmd/Ref Datalink A Datalink B Datalink C Datalink D Not Used Not Used Not Used