Dell POWEREDGE M1000E - Manual (Page 1070)

1042 Fabric OS Command Reference
53-1002746-01
sysMonitor
2
Buffer:
Custom:
Value : 10
Default:
Value : 10
To display current temperature values:
switch:admin> sysmonitor --show env -area temp -c
Class |Area |Index|Value |State | Monitoring
------|------|------|------|------------------
ENV |TEMP |000001|39 |InRange|Continue
ENV |TEMP |000002|35 |InRange|Continue
ENV |TEMP |000003|42 |InRange|Continue
ENV |TEMP |000004|44 |InRange|Pause
To configure Fabric Watch custom thresholds for flash memory:
switch:admin> sysmonitor --config resource -area flash \
-highthreshold -value 100
To apply the custom thresholds for flash memory:
switch:admin> sysmonitor --apply resource -area \
flash -thresh_level cust
To display the Fabric Watch configuration for flash memory:
switch:admin> sysmonitor --show resource
Class: RESOURCE
Area : FLASH
ThLevel : Cust
ActLevel: Cust
High :
Custom:
TimeBase: None
Value : 100
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
Default:
TimeBase: None
Value : 90
Trigger : Above Action: Raslog,SNMP
Trigger : Below Action: Raslog
Low:
Custom:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Default:
TimeBase: None
Value : 0
Trigger : Above Action: None
Trigger : Below Action: Raslog,SNMP
Buffer:
Custom:
Value : 0
Default:
Value : 0