Dell POWEREDGE M1000E - Manual (Page 850)

822 Fabric OS Command Reference
53-1002746-01
portShow
2
Path MTU Disc: 0
VLAN ID: 300
L2CoS: F: 7 H: 5 M: 3 L: 1
DSCP: F: 0 H: 0 M: 0 L: 0
Flags: 0x00000000
To display additional performance parameters for a circuit:
switch:admin> portshow fcipcircuit 1/12 0 --perf
-------------------------------------------
Tunnel ID: 1/12
Tunnel Description:
Admin Status: Enabled
Oper Status: Up
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:52:fe:00
Peer WWN: 10:00:00:05:1e:39:a4:76
Circuit Count: 2
Flags: 0x00000000
FICON: Off
Oper Status: Up
Flow Ctrl State: Off
Connected Count: 1
Tunnel Duration: 3 days, 19 hours, 54 minutes, 5 seconds
Compression Statistics:
0 Uncompressed Bytes
0 Compressed Bytes
1.00 : 1 Compression Ratio
Performance Statistics: Overall Throughput
31073824 Output Bytes
16 Bps 30s Avg, 93 Bps Lifetime Avg
70932 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
69170308 Input Bytes
85 Bps 30s Avg, 209 Bps Lifetime Avg
92393 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
TCP Stats:
1450493536 Output Bytes
16107875 Output Packets
844887492 Input Bytes
16117320 Input Packets
Retransmits: 0
Round Trip Time: 0 ms
Out Of Order: 0
Slow Starts: 0
To display QoS prioritization for the default circuit:
switch:admin> portshow fcipcircuit 1/12 0 --perf --qos
-------------------------------------------
Circuit ID: 1/12.0
Circuit Num: 0
Admin Status: Enabled