Portlogtypeenable – Dell POWEREDGE M1000E User Manual
Page 802
774
Fabric OS Command Reference
53-1002746-01
portLogTypeEnable
2
portLogTypeEnable
Enables the port log of a specified port log type.
SYNOPSIS
portlogtypeenable id
DESCRIPTION
Use this command to enable the port log for a specified port log type.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
id
Specifies a nonzero value that corresponds to the port log type to be enabled. Use
portLogEventShow for a listing of values corresponding to supported log types.
EXAMPLES
To enable logging of type 2 port log events:
switch:admin> portlogtypeenable 2
SEE ALSO