Dell POWEREDGE M1000E - Manual (Page 929)

Fabric OS Command Reference 901
53-1002746-01
secCertUtil
2
-fcapcacert
Imports an FCAP CA certificate.
-config cacert
Imports a CA certificate.
-config swcert [-nowarn]
Imports an SSL certificate. If -nowarn is specified, the SSL certificate import is
blocked without warning if the certificate is invalid. If -nowarn is omitted, you are
prompted for confirmation before importing an invalid switch certificate. However,
you will be able to import the invalid certificate. The -nowarn option effectively
prevents you from importing an invalid swcert certificate.
-enable https
Enables secure https. Optionally use this operand with -config swcert only.
The following operands are optional with import; if omitted, the command
prompts interactively for your input.
-commonswcert
Imports the switch certificate.
-commoncacert
Imports the CA certificate.
-protocol ftp | scp
Specifies the protocol as either FTP or SCP.
-ipaddr IP address
Specifies the IP address of the remote host.
-remotedir remote directory
Specifies the remote directory. Provide a fully qualified path name.
-certname certificate name
Specifies the certificate name.
-login login name
Specifies the login name for the server.
-password password
Specifies the password for the user account. When using SCP, for security
reasons, do not enter a password on the command line. Use the interactive
version instead.
show
Lists all existing PKI-based certificates on the switch. The following operands are
optional and exclusive.
-ldapcacert
Displays the certificate file name.
-fcapall
Indicates whether FCAP-related files exist or are empty.
-fcapswcert
Displays the contents of the FCAP SW certificate.
-commoncertall
Indicates whether CommonCert-related files exist or are empty.
filename
Displays the contents of the specified certificate.