Dell POWEREDGE M1000E User Manual

Page 229

Advertising
background image

Fabric OS Command Reference

201

53-1002746-01

cryptoCfg

2

In addition, this command set includes the following display commands. Output may vary depending on
your configuration. Refer to the Appendix of the Fabric OS Encryption Administrator's Guide for a more
comprehensive explanation of system states.

Use the --show -container -all -stat command for runtime status information on all CryptoTarget
containers in the encryption group. The display includes the following information:

Encryption group name: user-define label

Number of containers numeric value

For each container:

-

Container name: user-defined label

-

Type: disk or tape

-

EE node: The node WWN

-

EE slot: the slot number for the encryption engine

-

Target: The target port WWN

-

Target PID: The target PID

-

VT: The virtual target port WWN

-

VT PID: The virtual target PID

-

Number of hosts: numeric value

-

Number of tape sessions (or rekey sessions): numeric value

-

Host: The port WWN

-

Host PID: The host PID

-

VI: The virtual initiator port WWN

-

VI PID: The virtual initiator PID

-

Number of LUNs: numeric value

-

LUN number: numeric ID

-

LUN type: disk or tape drive, tape medium changer, tape attached medium changer, tape
offline/unknown, or unsupported/other

-

LUN serial number: The LUN serial number

-

Encryption mode: encrypt or cleartext

-

Encryption format: (brocade) native or DF-compatible

-

Tape policy type: pool-based, LUN-based

-

Encrypt existing data: disabled or enabled

-

Rekey: disabled or enabled

-

Key life: the key life span (in days)

-

Volume/Pool label: the label for the tape volume or tape pool

-

Internal EE LUN state: Encrypted, Cleartext, or Disabled (Data state is cleartext but metadata
exists on the LUN, or vice versa.)

-

Encryption algorithm: AES256-ECB (DF_compatible), AES256-GCM (native) or None
(cleartext)

-

Key ID state: Read, Write, or Key ID not applicable

-

Key ID: The Key ID (if available)

-

New LUN: Yes or No

-

Replication LUN type: Primary or Mirror

-

Tape session number: numeric value

-

Number of uncompressed blocks: numeric value

Advertising