Dell POWEREDGE M1000E - Manual (Page 254)

226 Fabric OS Command Reference
53-1002746-01
cryptoCfg
2
--decommission
Decommissions a disk LUN hosted in a specified container as seen from the
initiator. You must issue this command from the node that hosts the container.
Upon successful completion of a decommissioning operation, the LUN is deleted
from all the containers hosting it. All active paths to the LUN are lost; there is no
need to execute a decommissioning operation separately for each path
associated with the LUN. A commit operation is not required. The following
operands are required:
-container container_name
Specifies the name of the container that hosts the LUN.
-initiator initiatator_PWWN
Specifies the initiator port WWN.
-LUN LUN_num
Specifies the number of the LUN to be decommissioned.
--delete -decommissionedkeyids
Purges all key IDs associated with decommissioned LUNs from the internal
cache. You must delete the keys manually from the key vaults before purging the
cache.
--show -decommissionedkeyids
Displays the key IDs associated with decommissioned LUNs.
--show -vendorspecifickeyid key_ID
Displays vendor specific key_ID or UUID for a given key_ID.
EXAMPLES The following steps must be performed to decommission a disk LUN:
1. Execute the decommission operation on a LUN
switch:admin> cryptocfg --decommission -container disk_ct0 \
-initiator 21:01:00:1b:32:29:5d:1c -LUN 0
Operation succeeded.
2. Display the key IDs to be deleted manually from the keyvault
switch:admin> cryptocfg --show -decommissionedkeyids
Please Delete these keyed from the vault:
76:a0:01:f2:34:6e:44:cc:35:e9:be:71:64:ca:5e:90
switch:admin> cryptocfg --show vendorspecifickeyid
aa:8b:91:b0:35:6f:da:92:8a:72:b3:97:92:1b:ca:b4
uuid = b7e07a6a-db64-40c2-883a-0bc6c4e923e6
3. Manually delete the keys from the vault. This step requires accessing the Key Vault GUI and deleting
the keys manually.
4. Delete the key IDs from the internal cache.
switch:admin> cryptocfg --delete -decommissionedkeyids
operation succeeded
SEE ALSO None