Dell POWEREDGE M1000E User Manual
Page 167
Fabric OS Command Reference
139
53-1002746-01
configDefault
2
OPERANDS
This command has the following operands:
-fid FID
Specifies the Fabric ID of the logical switch for which to reset the configuration.
This operand is valid only in Virtual Fabric mode, and the executing account must
have chassis permissions.
-all
Restores all nonpersistent configuration parameters to factory default values
(switch and chassis parameters). This command requires chassis permissions.
-switch
Resets the switch configuration only. This operand is not valid in VF mode.
EXAMPLES
To restore all system configuration parameters to default values:
switch:admin> configdefault -all
Executing configdefault...Please wait
Setting the default config: FID = 128 Switch Name =stinger78
Already in Native Mode continuing with configDefault
Committing configuration ... done.
The switch has to be rebooted to allow the changes to take effect.
Do you want to reboot the system (y/n) [y]: y
SEE ALSO
,
,