Dell POWEREDGE M1000E - Manual (Page 230)

202 Fabric OS Command Reference
53-1002746-01
cryptoCfg
2
Use the --show -container -all -cfg command for configuration information on all CryptoTarget
containers in the encryption group, or specify a crypto_target_container_name for information on a
specified CTC. The display includes the following information:
•
Encryption group name: user-defined label
•
Number of containers: numeric value
•
For each container
-
Container name: a user-defined label
-
Type: tape or disk
-
EE node: the node WWN
-
EE slot: numeric value
-
Target: target port WWN, node WWN
-
VT: virtual target port WWN, node WWN
-
Number of hosts: numeric value
-
Configuration status: committed or defined
-
For each host: the host port WWN and the node WWN
-
For each VI: the virtual initiator port WWN and the node WWN
-
Number of LUNs: numeric value
If a rekey session is in progress while the command is run, the following additional information is
displayed:
•
LUN number: numeric ID
•
LUN type: disk, tape drive, tape medium changer, tape attached medium changer, offline/unknown,
or unsupported/other
•
LUN serial number (disk only): alpha-numeric ID
•
Encryption mode: encrypt or cleartext
•
Encryption format: native or DF compatible
•
Encrypt existing data: enabled or disabled
•
Rekey: enabled or disabled
•
LUN state: refer to the appendix in the Fabric OS Encryption Administrator's Guide
•
Encryption algorithm: AES256 -XTS (disk), AES256-CCM (tape), or none
•
Key ID state: Rekey
•
Key ID: numeric identifier
•
Key creation time: date and time of key creation
•
Key life (in days); number of days until expiration
•
Rekey status: numeric value
•
Key expiration time
•
Rekey session number: numeric value
•
Percentage complete
•
Rekey state: Read or write Phase
•
Rekey role: primary, alternate
•
Block size: numeric value
•
Number of blocks: numeric value
•
Current logical block address (LBA) being processed
Use the --show -tapepool command to display tape pool configuration parameters for all Tape pools or
for a specific tape pool. For each tape pool, the display includes the following information:
•
tape pool Label: user-define label
•
Key Life: Life span in days