Rtlogtrace – Dell POWEREDGE M1000E User Manual

Page 921

Advertising

Fabric OS Command Reference

893

53-1002746-01

rtLogTrace

Manages real-time trace logging.

SYNOPSIS

rtlogtrace --enable

rtlogtrace --disable

rtlogtrace --show

rtlogtrace --help

DESCRIPTION

Use this command to enable or disable real-time trace logging and to indicate whether the feature is
enabled or disabled.

The RTLog facility captures the most recent hardware events and low-level software interrupts on
Brocade DCX platforms in real time. When enabled, the RTLog traces are collected as part of the
supportSave utility. The RTLog generates no console output. The RTLog is enabled by default and
persistent across reboots. The rtLogTrace configuration is lost after a power cycle.

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operands:

--enable

Enables the RTLog on the active Control Processor (CP). The RTLog becomes
effective on the standby CP after a failover or a reboot of the active CP.

--disable

Disables the RTLog.

--show

Displays the current status of the RTLog as enabled or disabled.

--help

Displays the command usage.

EXAMPLES

To enable the RTLog:

Switch:admin> rtlogtrace --enable

To disable the RTLog:

Switch:admin> rtlogtrace --disable

To display the RTLog status:

Switch:admin> rtlogtrace --show