Dell POWEREDGE M1000E - Manual (Page 446)

418 Fabric OS Command Reference
53-1002746-01
fwMailCfg
2
9 : Filter Performance Monitor class
10 : Security class
11 : Resource Monitor class
12 : FRU Class
13 : Quit
Select an item => : (0..13) [11] 1
Mail Recipient information
--------------------------------------------
Email Alert = disabled
Mail Recipients = NONE
--------------------------------------------
1 : Show Mail Configuration Information
2 : Disable Email Alert
3 : Enable Email Alert
4 : Send Test Mail
5 : Set Recipient Mail Address for Email Alert
6 : Relay Host IP Configuration
7 : Quit
Select an item => : (1..7) [7]5
Mail Config Menu
--------------------------------------
1 : Environment class
2 : SFP class
3 : Port class
4 : Fabric class
5 : E-Port class
6 : F/FL Port (Optical) class
7 : Alpa Performance Monitor class
8 : End-to-End Performance Monitor class
9 : Filter Performance Monitor class
10 : Security class
11 : Resource Monitor class
12 : FRU Class
13 : Quit
Select an item => : (0..13) [11] 1
Mail To: [NONE] [email protected],[email protected],\
[email protected],[email protected],[email protected]
Email Alert configuration succeeded!
To configure Fabric Watch e-mail alerts in Access Gateway mode:
switch:admin> fwmailcfg
1 : Show Mail Configuration Information
2 : Disable Email Alert
3 : Enable Email Alert
4 : Send Test Mail
5 : Set Recipient Mail Address for Email Alert
6 : Relay Host IP Configuration
7 : Quit
Select an item => : (1..7) [7] 1
Config Show Menu
___________________________
1 : Environment class
2 : SFP class
3 : Port class