Dell POWEREDGE M1000E - Manual (Page 197)

Fabric OS Command Reference 169
53-1002746-01
configureChassis
2
To change the CS_CTL-based frame prioritization to default mode (one-to-one mapping):
switch:admin> configupload
Configure...
cfgload attributes (yes, y, no, n): [no]
Custom attributes (yes, y, no, n): [no]
system attributes (yes, y, no, n): [no]
fos attributes (yes, y, no, n): [no] y
CSCTL QoS Mode (0 = default; 1 = auto mode): (0..1) [1] 0
SEE ALSO configDefault , configShow , chassisEnable , chassisDisable , configure , ipAddrSet ,
portCfgLongDistance , switchDisable , switchEnable , upTime