Dell POWEREDGE M1000E - Manual (Page 448)

420 Fabric OS Command Reference
53-1002746-01
fwPortDetailShow
2
fwPortDetailShow
Displays the port information for specified user ports.
SYNOPSIS fwportdetailshow [--p port] | [--s portState]
DESCRIPTION Use this command to print the overall status of a specified port. The output of this command is different
for IPv4 and IPv6 addresses. The overall status is calculated based on the following contributors:
Port Errors
LFA
The number of link loss occurrences exceeding the limit for the time period.
LSY
The number of sync loss occurrences exceeding the limit for the time period.
LSI
The number of signal loss occurrences exceeding the limit for the time period.
PER
The number of protocol errors exceeding the limit for the time period
INW
The number of invalid words exceeding the limit for the time period
CRC
The number of invalid CRC errors exceeding the limit for the time period
PSC
The port hardware state changed too often.
BLP
Buffer limited port
SFP Errors
STM
The SFP temperature is out of range.
SRX
The SFP receive power is out of range.
STX
The SFP transmit power is out of range.
SCU
The SFP current is out of range.
SVO
The SFP voltage is out of range.
Overall status
Healthy
Every contributor is healthy.
Marginal
One or more contributors are in this status.
Faulty
Faulty hardware.
Offline
The port has no connectivity or is disabled.
If the overall status is not healthy, the contributing factors also are listed.