Secpolicyabort – Dell POWEREDGE M1000E User Manual
Page 939
Fabric OS Command Reference
911
53-1002746-01
secPolicyAbort
2
secPolicyAbort
Aborts all unsaved changes to the defined database.
SYNOPSIS
secpolicyabort
DESCRIPTION
Use this command to abort all changes to the defined security database that have not been saved to
flash memory and to abort changes to policy creation and modification operations from all the switches if
a fabric-wide consistency policy is not set for the particular policy.
NOTES
When an FCS policy is enabled, this command can be issued only from the Primary FCS switch.
Only the user who made the changes to the defined database may use this command to abort them.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To abort all changes that have not been saved to nonvolatile memory:
primaryfcs:admin> secpolicyabort
Unsaved data has been aborted.
primaryfcs:admin> secpolicyabort
No new data to abort.
SEE ALSO