Dell POWEREDGE M1000E - Manual (Page 58)

30 Fabric OS Command Reference
53-1002746-01
ag
2
--prefdel "F_Port [;F_Port2;...]" N_Port
Deletes the preferred Secondary N_Port for the specified F_Ports. The list of
F_Ports to be deleted from the secondary mapping must be enclosed in double
quotation marks. Port numbers must be separated by semicolons.
--prefshow
Displays the preferred Secondary N_Port for all F_Ports.
--adsset "F_Port [;F_Port2;...]" "WWN [;WWN2;...]"
Sets the list of devices that are allowed to login to a specified set of F_Ports.
Devices are specified by their world wide names. Lists must be enclosed in double
quotation marks. List members must be separated by semicolons. The maximum
number of entries in the allowed device list is twice the per port maximum login
count. Replace the WWN list with an asterisk (*) to indicate all access on the
specified F_Port list. Replace the F_Port list with an asterisk (*) to add the
specified WWNs to all the F_Ports' allow lists. A blank WWN list ("") indicates no
access. ADS policy must be enabled for this command to succeed.
--adsadd "F_Port [;F_Port2;...]" "WWN [;WWN2;...]"
Adds the specified WWNs to the list of devices allowed to login to the specified
F_Ports. Lists must be enclosed in double quotation marks. List members must be
separated by semicolons. Replace the F_Port list with an asterisk (*) to add the
specified WWNs to all the F_Ports' allow lists. ADS policy must be enabled for this
command to succeed.
--adsdel "F_Port [;F_Port2;...]" "WWN [;WWN2;...]
Deletes the specified WWNs from the list of devices allowed to login to the
specified F_Ports. Lists must be enclosed in double quotation marks. List
members must be separated by semicolons. Replace the F_Port list with an
asterisk (*) to remove the specified WWNs from all the F_Ports' allow lists. ADS
policy must be enabled for this command to succeed.
--adsshow
Displays the list of allowed device WWNs for all F_Ports.
--persistentalpaenable 1 | 0 mode
Configures the persistent ALPA feature. Once enabled, the ALPA parts of all
device PIDs become persistent regardless of whether they were logged in before
or after the persistent ALPA feature was enabled. ALPA persistence ensures that
there is no inconsistency between logged in devices. The persistent ALPA feature
is disabled by default.
1 | 0
Specify 1 to enable persistent ALPA. Specify 0 to disable the feature.
mode
Specifies the manner in which the ALPA is obtained in the event that the ALPA
value is already taken by another host. Valid modes include the following:
-s
Specifies a stringent ALPA request mode. In stringent mode, the login is
rejected if the ALPA is not available.
-f
Specifies a flexible ALPA request mode. In flexible mode, the host login is
accepted either with the requested ALPA value or with a different ALPA value
if the requested ALPA is not available.
--printalpamap F_Port
Displays the database entry for the specified port. An F_Port must be specified.
The output displays the PWWN-to-host-ALPA mapping.