Dell POWEREDGE M1000E User Manual

Page 368

Advertising
background image

340

Fabric OS Command Reference

53-1002746-01

fcrProxyConfig

2

If no proxy device WWN is stored in any slot for all edge fabrics, the following message is displayed: "All
slots empty."

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.

OPERANDS

This command has the following operands:

-s importedFID devWWN slot

Adds the specified devWWN (format: xx:xx:xx:xx:xx:xx:xx:xx) to the specified slot
(format XXYYH, where XX is the translate domain area_ID [F0H through FFH]
and YY is the port_ID [01H through 7FH]) for the edge fabric specified (1 through
128). The following messages may be displayed:

"WWN does not exist in any proxy device slot." The WWN does not exist in
any slot for the specified edge fabric.

"Too many proxy slots configured. Remove some unused proxy device
WWNs from their slots using the -r operand and try again." All slots are used
for the specified edge fabric.

"The specified slot already contains a WWN, overwrite? [y]" The specified slot
already contains an entry. You are then prompted for confirmation.

-r importedFID devWWN

Removes the specified devWWN (format: XX:XX:XX:XX:XX:XX:XX:XX) from its
slot for the edge fabric specified by importedFID (1 through 128). If the WWN
does not exist in any slot for the specified edge fabric, the following message is
displayed: "WWN does not exist in any proxy device slot."

EXAMPLES

To display the persistent proxy device configuration:

switch:admin> fcrproxyconfig
Imported FID Device WWN Slot
002 50:05:07:65:05:84:08:d7 f001
002 50:05:07:65:05:84:0a:7b f002
002 22:00:00:20:37:c3:11:71 f001
002 22:00:00:20:37:c3:1a:8a f002
003 10:00:00:00:c9:2b:6a:2c f001

To persistently configure device WWN 00:11:22:33:44:55:66:77 to use slot f101h in fabric 5:

switch:admin> fcrproxyconfig -s 5 \
00:11:22:33:44:55:66:77 f101

To remove device WWN 00:11:22:33:44:55:66:77 from its persistent slot in fabric 5:

switch:admin> fcrproxyconfig -r 5 \
00:11:22:33:44:55:66:77
WWN deleted from proxy device slot

SEE ALSO

fcrPhyDevShow

,

fcrProxyDevShow

,

fcrXlateConfig

,

lsanZoneShow

,

switchShow

Advertising