Dell POWEREDGE M1000E User Manual

Page 745

Advertising
background image

Fabric OS Command Reference

717

53-1002746-01

portCfgShow

2

switch:admin> portcfgshow fciptunnel 1/12
-------------------------------------------
Tunnel ID: 1/12
Tunnel Description:
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Enabled (legacy)
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:52:fe:00
Flags: 0x00000000
FICON: Off

To display the inband management interface for a single GbE Port on a Brocade 7800:

switch:admin> portcfgshow mgmtif ge0

Inband Management: ge0 Enabled
Interface IPv4 Address NetMask Effective MTU Flags
--------------------------------------------------------------
0 20.20.0.151 255.255.255.0 1500

Flags: U=Up B=Broadcast D=Debug L=Loopback P=Point2Point R=Running
N=NoArp PR=Promisc M=Multicast S=StaticArp LU=LinkUp

To display the management route for a configured inband management interface on a Brocade 7800:

switch:admin> portcfgshow mgmtroute ge0

Port: ge0
IP Address Mask Gateway Metric Flags
-------------------------------------------------------------
192.168.1.0 255.255.255.0 20.20.1.250 0

Flags: U=Usable G=Gateway H=Host C=Created(Interface) S=Static
L=LinkLayer(Arp)

SEE ALSO

portCfg

,

portCfgAutoDisable

,

portCfgCreditRecovery

,

portCfgEport

,

portCfgFec

,

portCfgGport

,

portCfgLongDistance

,

portCfgLport

,

portCfgNPIVPort

,

portCfgOctetSpeedCombo

,

portCfgSpeed

,

portCfgTrunkPort

,

portSwapDisable

,

portSwapShow

,

switchShow

Advertising