Dell POWEREDGE M1000E User Manual
Page 726
698
Fabric OS Command Reference
53-1002746-01
portCfgOctetSpeedCombo
2
combo
Specifies the speed combination for the ports in the octet. The following speed
combinations are supported:
1
Supports autonegotiated or fixed port speeds of 16 Gbps,8 Gbps,4 Gbps, and 2
Gbps.
2
Supports autonegotiated or fixed port speeds of 10 Gbps,8 Gbps,4 Gbps, and 2
Gbps.
3
Supports autonegotiated or fixed port speeds of 16 Gbps and 10 Gbps.
-default
Sets all octet combination values back to the default value of 1.
EXAMPLES
To configure the ports in first octet for combination 3 on a Brocade 6510:
switch:admin> portcfgoctetspeedcombo 3 3
To reset the combination to default:
switch:admin> portcfgoctetspeedcombo 3 -default
To switch from combo 3 to combo 2 and there are online ports running at 10G speed.:
switch:admin> portcfgoctetspeedcombo 2 2
The following ports must be disabled or \
speed configuration needs to be change.
Please retry the operation after taking appropriate action.
Speeds supported for octet combo 2 - [10G,8G,4G,2G,AN]
Port Speed
===================
0 16*
1 N16+
2 N16+
3 N16+
4 N10+
5 N16+
6 N16+
7 N16+
* Port speed configuration must be changed
+ Port must be disabled
Setting octet speed combo failed
SEE ALSO