Dell POWEREDGE M1000E User Manual
Page 707
Fabric OS Command Reference
679
53-1002746-01
portCfgFillword
2
To set the fill word of a port to ARBFF-ARBFF using the -arbff-arbff option:
switch:admin> portcfgfillword 2/3, -arbff-arbff
To set the fill word of a port to IDLE-ARBFF using the -idle-arbff option:
switch:admin> portcfgfillword 27, -idle-arbff
switch:admin> portcfgshow 27
Area Number: 27
Speed Level: AUTO(HW)
Fill Word(On Active) 2(SW Idle-Arbff)
Fill Word(Current) 2(SW Idle-Arbff)
(output truncated)
To set the fill word of a port to the preferred mode 3 (If hardware arb-arbff fails, try software idle-arbff) and
using the passive option:
switch:admin> portcfgfillword 28 -aa-then-ia passive
switch:admin> portcfgshow 28
Area Number: 28
Speed Level: AUTO(HW)
Fill Word(On Active) 3(A-A then SW I-A)
Fill Word(Current) 0(Idle-Idle)
(output truncated)
switch:admin> portcfgshow
Ports of Slot 0 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
--------------------+---+---+---+---+-----+---+---+---+-----+---+---+
Speed AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN AN
Fill Word(On Active)0 0 0 0 0 0 0 0 0 0 0 2 3 0 0 0
Fill Word(current) 0 0 0 0 0 0 0 0 0 0 0 2 0 0 0 0
(output truncated)
SEE ALSO