Dell POWEREDGE M1000E - Manual (Page 601)

Fabric OS Command Reference 573
53-1002746-01
nsZoneShow
2
nsZoneShow
Displays the zone names.
SYNOPSIS nszoneshow -pid pid
nszoneshow -wwn wwn
nszoneshow -pid "pid1,pid2"
nszoneshow -wwn "wwn1,wwn2"
DESCRIPTION Use this command to display the zone names that a specified device or device-pair are part of. The
devices can be zoned as part of regular zones, Traffic Isolation (TI) zones, or Frame Redirect (RD)
zones.
•
If you specify a single Port ID (PID) or world wide name (WWN), the command displays the names
of the regular zones, RD zones, or TI zones that the devices belong to.
•
If you specify a PID pair or WWN pair, the command displays the names of the common zones
(regular, RD or TI zones) that the device pairs share.
•
For devices zoned as part of an RD zone, the command displays the following information:
-
If you specify the PID or WWN pair for a given host and virtual target (VT) pair, the command
displays the RD zone name.
-
If you specify the PID or WWN pair for a given virtual host (VI) and target pair, the command
displays the RD zone name.
-
If you specify the PID or WWN for a given VI or VT, the command displays the RD zone name.
-
If you specify the PID or WWN pair for a given host and target pair, the command displays the
regular zone name and the RD zone name.
-
If you specify the PID or WWN for a given host or target, the command displays the regular
zone name and the RD zone name.
The host, target, VI and VT are specified while creating zones using the zone command. The RD
zone names will start with the prefix 'red_0917'. You can use the cfgshow or the zone
--showcommand to view the zone configuration information.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS This command has the following operands:
-pid pid
Displays the zone names that the PID belongs to.
-wwn wwn
Displays the zone names that the WWN belongs to.
-pid "pid1,pid2"
Displays the zone names of the common zones where both PIDs are zoned
together.
-wwn "wwn1,wwn2"
Displays the zone names of the common zones where both WWNs are zoned
together.