Dell POWEREDGE M1000E - Manual (Page 981)

Fabric OS Command Reference 953
53-1002746-01
slotShow
2
slotShow
Displays the status of all slots in the system.
SYNOPSIS slotshow [-m] [-p]
DESCRIPTION Use this command to display the current status of each slot in the system. Depending on the option used,
the command retrieves information on blade type, blade ID, status, Brocade model name, and power
usage for each slot in the switch or chassis.
This command does not display the model names for unsupported blades. If a blade is not supported,
only the Blade ID is displayed, and the Status field registers as FAULTY(9). Use the list below to identify
the model name associated with an unsupported blade.
When no operand is specified, slotShow displays the blade type, blade ID, and status for each slot. In
this view, the fields and their possible values are as follows:
Slot
Displays the physical slot number.
Blade Type
Displays the blade type as one of the following:
SW BLADE
The blade is a switch.
CP BLADE
The blade is a control processor.
CORE BLADE
The blade is a core switch blade.
AP BLADE
The blade is an application processor.
UNKNOWN
The blade not present or its type is not recognized.
ID
Displays the blade type ID as one of the following:
16
CP256 control processor blade
17
FC4-16 port blade
18
FC4-32 port blade
31
FC4-16IP port blade
33
FA4-18 port blade
36
FC4-48 port blade
37
FC8-16 switch blade
43
FS8-18 application processor blade