Dell POWEREDGE M1000E - Manual (Page 893)

Fabric OS Command Reference 865
53-1002746-01
portThConfig
2
portlog
Locks the port log. Following an event, the port log locks to retain information
about an event, preventing the information from being overwritten as the log
becomes full.
none
Event triggers no action.
-buffer value
Specifies the buffer value for in range behavior. A buffer defines a zone within
which event criteria are met, rather than a single threshold value. This operand is
valid only with the -trigger options.
-nosave
Prevents the configuration changes from being saved persistently. This option
allows you to make and view changes without overwriting the saved configuration.
When you use --set with the -nosave option and the switch reboots your changes
will be lost.
--apply
Applies the custom or default configuration for thresholds, actions, or both. This
command allows you to toggle between custom and default settings. The
specified configuration takes effect upon execution of this command. When you
select custom, the saved configuration becomes effective. You must specify a port
type and area when applying a configuration.
--cancel
Cancels a nonpersistent custom configuration. This command effectively undoes
the -nosave operation without reboot. You must specify a port type and area type
with this command. Thresholds and alarm levels are optional with this command;
if omitted, all nonpersistent configurations for the specified port type and area type
are canceled.
--show
Displays the threshold configuration or run-time status for all configured port types
and areas. You can optionally specify a port type to display the threshold for ports
of that type only. The display includes the port persistence time value in seconds,
which is set by the fwSet command. Specify an area to display the area-specific
configuration only. When issued without operands, this command displays Fabric
Watch thresholds for all classes and areas.
-current
Displays current values for a specified port type and area, as registered by Fabric
Watch, or for all port types and areas. The output includes PortType, Area, Port
number, Circuit ID (for the Brocade 7800 and FS8-24 only), Value, State, and
Monitoring State (pause or continue). The State field reports whether the current
value is above, in range, or below (info) the configured threshold.
The following operands are optional with the --apply, --cancel, and --show
options; if omitted, the default thresholds are used.
-thresh_level def | cust
Configures or displays default or custom threshold configuration settings.
-action_level def | cust
Configures or displays default or custom configuration settings.
--pause | --continue arguments
Pauses or resumes monitoring. The following arguments are required:
class
Specifies the class.