Fandisable – Dell POWEREDGE M1000E User Manual
Page 309
Advertising
Fabric OS Command Reference
281
53-1002746-01
fanDisable
2
fanDisable
Disables a fan unit.
SYNOPSIS
fandisable unit
DESCRIPTION
Use this command to disable a nonfaulty fan unit by setting the RPM speed to 0.
NOTES
This command is not available on nonbladed systems except for the Brocade 5300.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
unit
Specifies the number of the fan unit to disable.
EXAMPLES
To disable a fan unit:
switch:admin> fandisable 1
Fan unit 1 has been disabled
SEE ALSO
Advertising