Fciphelp – Dell POWEREDGE M1000E User Manual
Page 320
292
Fabric OS Command Reference
53-1002746-01
fcipHelp
2
fcipHelp
Displays FCIP command information.
SYNOPSIS
fciphelp
DESCRIPTION
Use this command to display a listing of Fibre Channel over IP (FCIP) commands with short descriptions
for each command. FCIP commands require an FCIP license.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display FCIP command help information:
switch:admin> fciphelp
bladecfggemode Configure 1GigE/10GigE port configuration
for blade
fciphelp Print FCIP help info
licenseslotcfg Configure licenses on a slot basis
portcfg Create/Delete a new ip interface/route/arp
entry on the GigE port
portcfggemediatype Configure media type for GigE port
portcmd Execute commands (ping etc) on the GigE port
portshow Show configured ip interfaces/routes/arp
entries or fcip tunnels on the GigE Port
SEE ALSO
,