Dell POWEREDGE M1000E - Manual (Page 688)

660 Fabric OS Command Reference
53-1002746-01
portCfgCreditRecovery
2
portCfgCreditRecovery
Enables or disables credit recovery on a port.
SYNOPSIS portcfgcreditrecovery --enable [slot/]port
portcfgcreditrecovery --disable [slot/]port
portcfgcreditrecovery --help [slot/]port
DESCRIPTION Use this command to enable or disable credit recovery on a port.
The credit recovery feature enables credits or frames to be recovered. The default credit recovery
configuration is enabled.
NOTES This command is supported in Access Gateway mode in Fabric OS v7.1.0 and later.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
The Fabric OS port configuration commands are not supported on FCoE ports.
OPERANDS This command has the following operands:
--disable
Disables credit recovery configuration on the specified port.
--enable
Enables credit recovery configuration on the specified port.
--help
Displays the command usage.
EXAMPLES To enable credit recovery on a port:
switch:admin> portcfgcreditrecovery --enable 3/15
To disable credit recovery on a port:
portcfgcreditrecovery --disable 3/15
SEE ALSO portCfgShow