Fwalarmsfilterset – Dell POWEREDGE M1000E User Manual
Page 438
410
Fabric OS Command Reference
53-1002746-01
fwAlarmsFilterSet
2
fwAlarmsFilterSet
Enables or disables alarms for Fabric Watch.
SYNOPSIS
fwalarmsfilterset [mode]
DESCRIPTION
Use this command to configure alarm filtering for Fabric Watch. By turning off the alarms, all
nonenvironment class alarms are suppressed. By turning on the alarms, all class alarms are generated.
NOTES
This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
mode
Specify 1 to enable the alarms, 0 to disable the alarms. If no operand is specified,
the default value is 0 (alarms deactivated). This operand is optional; if omitted, this
command disables the alarms.
EXAMPLES
To enable alarms in Fabric Watch:
switch:admin> fwalarmsfilterset
FW: Alarms are already disabled
switch:admin> fwalarmsfilterset 1
FW: Alarms are already enabled
SEE ALSO