Dell POWEREDGE M1000E - Manual (Page 328)

300 Fabric OS Command Reference
53-1002746-01
fcoeLoginCfg
2
fcoeLoginCfg
Manages or displays the FCoE login configuration.
SYNOPSIS fcoelogincfg --show
[-switch swwn | -logingroup lgname]
[-saved] | [-mergestatus]
fcoelogincfg --save
fcoelogincfg --transshow
fcoelogincfg --transabort
fcoelogincfg --purge -conflicting [-nonexisting]
fcoelogincfg --purge -nonexisting [-conflicting]
fcoelogincfg --enable
fcoelogincfg --disable
fcoelogincfg --help
DESCRIPTION Use this command to save, abort, or display the current FCoE login configuration, including ongoing
transactions and the effective (saved) configuration.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
The FCoE Login management feature is not supported in Access Gateway mode.
OPERANDS This command has the following operands.
--help
Displays the command usage.
--show
Displays the state of the FCoE login configuration including current transactions
and effective (saved) configuration.
-switch swwn
Displays the login groups for the specified switch.
-logingroup lgname
Displays the login group configuration for the specified login group.
-saved
Displays only the effective configuration.
-mergestatus
Displays the status of the last configuration merge during the last fabric merge.
This operand also displays conflicting login groups and login groups for
nonexisting switches.
--save
Saves and applies FCoE login configuration changes as the effective
configuration fabric-wide.