Dell POWEREDGE M1000E - Manual (Page 876)

848 Fabric OS Command Reference
53-1002746-01
portStatsShow
2
ge_stat_tx_ucast_frms
The number of unicast frames transmitted on the GbE port.
ge_stat_tx_mcast_frms
The number of multicast frames transmitted on the GbE port.
ge_stat_tx_bcast_frms
The number of broadcast frames transmitted on the GbE port.
ge_stat_tx_vlan_frms
The number of VLAN frames transmitted on the GbE port.
ge_stat_tx_pause_frms
The number of pause frames transmitted on the GbE port.
ge_stat_rx_frms
The number of frames received on the GbE port.
ge_stat_rx_octets
The number of octets received on the GbE port.
ge_stat_rx_ucast_frms
The number of unicast frames received on the GbE port.
ge_stat_rx_mcast_frms
The number of multicast frames received on the GbE port.
ge_stat_rx_bcast_frms
The number of broadcast frames received on the GbE port.
ge_stat_rx_vlan_frms
The number of VLAN frames received on the GbE port.
ge_stat_rx_pause_frms
The number of pause frames received on the GbE port.
ge_err_carrier
The number of times the GbE port lost carrier sense.
ge_err_length
The number of times an invalid length error was observed on the GbE port.
ge_err_crc
The number of CRC Errors received on the GbE port.
ge_err_abort
The number of frames aborted on the GbE port.
ge_err_overrun
The number of overruns observed on the GbE port.
ge_err_fifo_ovf
The number of times an overflow of the first in first out (FIFO) queue was
observed on the GbE port.
ip_err_hdr_cksum
The number of checksum errors observed on the GbE port.
ip_err_tcp_data_chksum
The number of IP TCP data checksum errors observed on the GbE port.
NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
This command is not supported on FCoE ports.