Dell POWEREDGE M1000E - Manual (Page 836)

808 Fabric OS Command Reference
53-1002746-01
portShow
2
To display additional performance parameters on tunnel 1/12 (add -c to display all circuits):
switch:admin> portshow fciptunnel 1/12 --perf
-------------------------------------------
Tunnel ID: 1/12
Tunnel Description:
Admin Status: Enabled
Oper Status: Up
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
QoS Percentages: High 50%, Med 30%, Low 20%
Remote WWN: Not Configured
Local WWN: 10:00:00:05:1e:52:fe:00
Peer WWN: 10:00:00:05:1e:39:a4:76
Circuit Count: 2
Flags: 0x00000000
FICON: Off
Oper Status: Up
Flow Ctrl State: Off
Connected Count: 1
Tunnel Duration: 3 days, 19 hours, 32 minutes, 33 seconds
Compression Statistics:
0 Uncompressed Bytes
0 Compressed Bytes
1.00 : 1 Compression Ratio
Performance Statistics: Overall Throughput
30945748 Output Bytes
15 Bps 30s Avg, 93 Bps Lifetime Avg
70653 Output Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
68856512 Input Bytes
305 Bps 30s Avg, 208 Bps Lifetime Avg
92029 Input Packets
0 pkt/s 30s Avg, 0 pkt/s Lifetime Avg
TCP Stats:
1444818696 Output Bytes
16044954 Output Packets
841543704 Input Bytes
16054360 Input Packets
Retransmits: 0
Round Trip Time: 0 ms
Out Of Order: 0
Slow Starts: 0
To display TCP connections for the circuits on the tunnel:
switch:admin> portshow fciptunnel 2/12 -c --tcp
-------------------------------------------
Tunnel ID: 1/12
Tunnel Description:
Admin Status: Enabled
Oper Status: Up
Compression: Off
Fastwrite: Off
Tape Acceleration: Off
TPerf Option: Off
IPSec: Disabled
QoS Percentages: High 50%, Med 30%, Low 20%