KEYENCE KV Series - Manual (Page 106)

Chapter 2 Editor
2-82
2
Object screen
Sets the color tint.
Sets the brightness.
2.14 Changing the Display Color on the Screen
In the Ladder Builder, the color layout of the screen can be changed. This section
describes how to change display colors on the screen.
2.14.1 Changing display colors on the screen
View ➔ Change Ladder Diagram Color
This function sets the color layout of the Ladder Builder screen.
The setup procedure is described below.
1. Select "Change Ladder Diagram Color" from the "View" menu.
The "Change Ladder Diagram Color" dialog box is displayed.
The "Color" box provided on the side of each item indicates the color currently
set.
2. Select the item whose color is to be changed in the "Section to be Specified" text
box, and click the button of "Color".
The "Section to be Specified" text box can be set by clicking the desired position
in the diagram displayed on the object screen.
The "Color Setup" dialog box is displayed.
Select the desired color, and click the [OK] button.
You can create an intermediate color by clicking the [Create Color] button.
To determine the intermediate color created, click the [Add Color] button.
3. When changes are complete, click the [OK] button.
Click the [OK] button to confirm the setting. Click the [Cancel] button to cancel
the setting.
To return the screen colors to the default setting, click the [Back to Initial Setting]
button.
Note: When the number of display colors on the screen is set to 256 or less, some
colors may not be displayed correctly.
KVSKA Chap 02.P65 08.3.11, 11:29 AM 82