KEYENCE KV Series - Manual (Page 76)

Chapter 2 Editor
2-52
2
2.6 Edit and Arrangement
This section describes ladder diagram edit procedures, such as copy/movement/
deletion of the range selected in the ladder diagram, insertion/deletion of lines, how
to change the number of columns, arrangement of circuits, etc.
2.6.1 Copy, move, and delete
Copy, move or delete the range selected in a ladder diagram.
To copy, move or delete the selected range, use the "cut & paste" method which is a
standard Windows editing procedure.
Selecting the range
To copy, move or delete data, first select the range. The range can be selected
using the mouse or keyboard.
Note: Copy, move and delete functions cannot be performed while in connection
line edit mode. If connection line edit mode is selected, select "Edit Connection Line"
from the "Edit" menu, and select the normal edit mode (in which the check mark is
not added).
■ Selecting the range using the mouse
1. Place the mouse pointer in the selection start position, and click.
The cursor is displayed.
KVSKA Chap 02.P65 08.3.11, 11:28 AM 52