KEYENCE KV Series - Manual (Page 144)

Chapter 3 Simulator
2-120
3
To register devices by dragging and dropping them from the ladder monitor window,
perform the following procedure.
1. Select "Registration Monitor" from the "File" menu, or click the button.
• The registration monitor window is open.
Note: Every time this operation is performed, a new window is opened.
2. On the ladder monitor window, select devices to be registered, and press and
hold the left mouse button.
• The cursor shape is changed.
• When you press the left mouse button while pressing and holding the [Ctrl] key
on the ladder monitor window, all the devices displayed in the ladder monitor
window are selected.
3. While pressing and holding the left mouse button, move the cursor to the regis-
tration monitor window (drag), and release the left button.
• The selected devices are displayed on the registration monitor window.
• Timing charts are displayed by default. To display comments, select the com-
ment type using "Comment" on the dialog bar.
Saving the registration monitor
File ➔ Save Window As
To save the registration monitor window, perform the following procedure.
1. Select the registration monitor window to be saved as the current window.
When registering one device
▼
▼
When registering all the devices displayed on the screen
Drag
[Ctrl] +
Drag
KVSKA Chap 03.P65 08.3.11, 11:29 AM 120