KEYENCE KV Series - Manual (Page 171)

Chapter 4 Monitor
2-147
1 4
4.4.7 Setting the PLC operation mode
Set the operation mode of the conventional KV.
When the monitor is started up for the first time, the PLC mode is selected.
To change the PLC mode, select the desired mode from "PLC Mode" on the menu
or click the button.
Operation (RUN mode)
PLC Mode ➔ Run (Shift + F7)
In this mode, a program operates normally.
Stop (STOP mode)
PLC Mode ➔ Stop (Shift + F8)
In this mode, program execution is stopped.
All the outputs are turned off.
KVSKA Chap 04.P65 08.3.11, 11:30 AM 147