KEYENCE KV Series - Manual (Page 219)

Appendices
2-195
1
Appendices
G-3 Monitor
■ Function list and menu
A brief description of functions available in the monitor are given below.
For detailed descriptions, refer to the corresponding reference page.
Reading/saving a window
Reading and saving a monitor all window File ➔ Open Window 2-111
➔ Save Window As
Reads a monitor all file. Saves the current monitor all window -with
a new file name (extension: kal).
Reading and saving a registration monitor window
File ➔ Open Window 2-121
➔ Save Window As 2-120
Reads a registration monitor file. Saves the current registration monitor
window with a new file name (extension: kre).
Reading and saving change all File ➔ Open Window 2-150
➔ Save Window As
Saves the device setting read from the PLC with a new file name,
or reads the saved device setting (extension: kdv).
Setting communication parameters
Setting serial ports Settings ➔ Serial Port 2-136
Sets the COM port and baud rate (communication speed).
Setting the machine number (KV-300 Series only)
2-137
PLC operation mode
Setting the PLC operation mode Execute ➔ RUN 2-147
➔ STOP
Selects the operation mode of the PLC.
Starting and stopping the monitor
Starting the monitor Monitor ➔ Start Monitor 2-145
When the monitor is started, the operation status of the program
transferred to the PLC is displayed on the ladder monitor window, the
registration monitor window and the monitor all window in real-time.
Stopping the monitor Monitor ➔ Stop Monitor 2-145
Stops the monitor.
Disabling input refresh/output
Disabling the input refresh Monitor ➔ Disable Input Refresh 2-149
Disables reading of input relays (input refresh) in the PLC.
* This setting is available in the KV-300 and Visual KV Series only.
Disabling the output Monitor ➔ Disable Output 2-149
Disables update of the output status.
* This setting is available in the KV-300 and Visual KV Series only.
KVSKA Appendix.P65 08.3.11, 11:26 AM 195